Superior antibacterial and cleaning performance. Tested to EN 1276. Excellent cleaning power on all food types including animal fats, vegetable oils, starches and proteins.

Selgiene is non-tainting and suitable for food contact surfaces. For areas requiring a 2-stage clean, Selgiene can be used for both cleaning and disinfection steps.

Application

Selgiene is ideal for the catering and food processing industry or where an unperfumed disinfectant is desirable

Directions

insert test summary table here) Spray or mop onto surface and leave for a minimum of 30 seconds. Wipe or rinse with a clean cloth or mop. (insert task summary table here)

Technical

Composition - A high active blend of quaternary ammonium salts, chelating agents and nonionic and amphoteric surfactants with a high degree of synergistic action.

Appearance - Clear liquid

Colour - Colourless

Cloud Point - >40

Density - 1.036

pH - 9.8 - 10.8

Fragrance - Very low characteristic

Stability - 2 Years minimum in unopened containers.

Biodregradability

All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water

Statutory Conditions

All biocides/disinfectant/preservatives contained within Selden products fully comply with the EU Biocidal product Directive 98/8/EC, ensuring a high level of protection for humans, animals and the environment.

Bactericidal Efficiacy Passes

BS EN 1276 in dirty conditions at a dilution of 1:50

Flashpoint >100°C

Product is for professional use only.